← Back to NC8
CHAPTER 72

IRON AND STEEL

I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM

72.01 Pig iron and spiegeleisen in pigs, blocks or other primary forms
Non-alloy pig iron containing by weight 0,5 % or less of phosphorus
Containing by weight not less than 0,4 % of manganese
Containing by weight 1 % or less of silicon
7201 10 11
Containing by weight more than 1 % of silicon
7201 10 19
Containing by weight not less than 0,1 % but less than 0,4 % of manganese
7201 10 30
Containing by weight less than 0,1 % of manganese
7201 10 90
Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
7201 20 00
Alloy pig iron; spiegeleisen
Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
7201 50 10
Other
7201 50 90
72.02 Ferro-alloys
Ferro-manganese
Containing by weight more than 2 % of carbon
With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %
7202 11 20
Other
7202 11 80
Other
7202 19 00
Ferro-silicon
Containing by weight more than 55 % of silicon
7202 21 00
Other
Containing by weight 4 % or more but not more than 10 % of magnesium
7202 29 10
Other
7202 29 90
Ferro-silico-manganese
7202 30 00
Ferro-chromium
Containing by weight more than 4 % of carbon
Containing by weight more than 4 % but not more than 6 % of carbon
7202 41 10
Containing by weight more than 6 % of carbon
7202 41 90
Other
Containing by weight not more than 0,05 % of carbon
7202 49 10
Containing by weight more than 0,05 % but not more than 0,5 % of carbon
7202 49 50
Containing by weight more than 0,5 % but not more than 4 % of carbon
7202 49 90
Ferro-silico-chromium
7202 50 00
Ferro-nickel
7202 60 00
Ferro-molybdenum
7202 70 00
Ferro-tungsten and ferro-silico-tungsten
7202 80 00
Other
Ferro-titanium and ferro-silico-titanium
7202 91 00
Ferro-vanadium
7202 92 00
Ferro-niobium
7202 93 00
Other
Ferro-phosphorus
7202 99 10
Ferro-silico-magnesium
7202 99 30
Other
7202 99 80
72.03 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
Ferrous products obtained by direct reduction of iron ore
7203 10 00
Other
7203 90 00
72.04 Ferrous waste and scrap; remelting scrap ingots of iron or steel
Waste and scrap of cast iron
7204 10 00
Waste and scrap of alloy steel
Of stainless steel
Containing by weight 8 % or more of nickel
7204 21 10
Other
7204 21 90
Other
7204 29 00
Waste and scrap of tinned iron or steel
7204 30 00
Other waste and scrap
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
Turnings, shavings, chips, milling waste, sawdust and filings
7204 41 10
Trimmings and stampings
In bundles
7204 41 91
Other
7204 41 99
Other
Fragmentised (shredded)
7204 49 10
Other
In bundles
7204 49 30
Other
7204 49 90
Remelting scrap ingots
7204 50 00
72.05 Granules and powders, of pig iron, spiegeleisen, iron or steel
Granules
7205 10 00
Powders
Of alloy steel
7205 21 00
Other
7205 29 00

II. IRON AND NON-ALLOY STEEL

72.06 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
Ingots
7206 10 00
Other
7206 90 00
72.07 Semi-finished products of iron or non-alloy steel
Containing by weight less than 0,25 % of carbon
Of rectangular (including square) cross-section, the width measuring less than twice the thickness
Rolled or obtained by continuous casting
Of free-cutting steel
7207 11 11
Other
Of a thickness not exceeding 130 mm
7207 11 14
Of a thickness exceeding 130 mm
7207 11 16
Forged
7207 11 90
Other, of rectangular (other than square) cross-section
Rolled or obtained by continuous casting
7207 12 10
Forged
7207 12 90
Other
Of circular or polygonal cross-section
Rolled or obtained by continuous casting
7207 19 12
Forged
7207 19 19
Other
7207 19 80
Containing by weight 0,25 % or more of carbon
Of rectangular (including square) cross-section, the width measuring less than twice the thickness
Rolled or obtained by continuous casting
Of free-cutting steel
7207 20 11
Other, containing by weight
0,25 % or more but less than 0,6 % of carbon
7207 20 15
0,6 % or more of carbon
7207 20 17
Forged
7207 20 19
Other, of rectangular (other than square) cross-section
Rolled or obtained by continuous casting
7207 20 32
Forged
7207 20 39
Of circular or polygonal cross-section
Rolled or obtained by continuous casting
7207 20 52
Forged
7207 20 59
Other
7207 20 80
72.08 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
In coils, not further worked than hot-rolled, with patterns in relief
7208 10 00
Other, in coils, not further worked than hot-rolled, pickled
Of a thickness of 4,75 mm or more
7208 25 00
Of a thickness of 3 mm or more but less than 4,75 mm
7208 26 00
Of a thickness of less than 3 mm
7208 27 00
Other, in coils, not further worked than hot-rolled
Of a thickness exceeding 10 mm
7208 36 00
Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208 37 00
Of a thickness of 3 mm or more but less than 4,75 mm
7208 38 00
Of a thickness of less than 3 mm
7208 39 00
Not in coils, not further worked than hot-rolled, with patterns in relief
7208 40 00
Other, not in coils, not further worked than hot-rolled
Of a thickness exceeding 10 mm
Of a thickness exceeding 15 mm
7208 51 20
Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of
2050 mm or more
7208 51 91
Less than 2050 mm
7208 51 98
Of a thickness of 4,75 mm or more but not exceeding 10 mm
Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
7208 52 10
Other, of a width of
2050 mm or more
7208 52 91
Less than 2050 mm
7208 52 99
Of a thickness of 3 mm or more but less than 4,75 mm
Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm and of a thickness of 4 mm or more
7208 53 10
Other
7208 53 90
Of a thickness of less than 3 mm
7208 54 00
Other
Perforated
7208 90 20
Other
7208 90 80
72.09 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
In coils, not further worked than cold-rolled (cold-reduced)
Of a thickness of 3 mm or more
7209 15 00
Of a thickness exceeding 1 mm but less than 3 mm
Electrical
7209 16 10
Other
7209 16 90
Of a thickness of 0,5 mm or more but not exceeding 1 mm
Electrical
7209 17 10
Other
7209 17 90
Of a thickness of less than 0,5 mm
Electrical
7209 18 10
Other
Of a thickness of 0,35 mm or more but less than 0,5 mm
7209 18 91
Of a thickness of less than 0,35 mm
7209 18 99
Not in coils, not further worked than cold-rolled (cold-reduced)
Of a thickness of 3 mm or more
7209 25 00
Of a thickness exceeding 1 mm but less than 3 mm
Electrical
7209 26 10
Other
7209 26 90
Of a thickness of 0,5 mm or more but not exceeding 1 mm
Electrical
7209 27 10
Other
7209 27 90
Of a thickness of less than 0,5 mm
Electrical
7209 28 10
Other
7209 28 90
Other
Perforated
7209 90 20
Other
7209 90 80
72.10 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
Plated or coated with tin
Of a thickness of 0,5 mm or more
7210 11 00
Of a thickness of less than 0,5 mm
Tinplate
7210 12 20
Other
7210 12 80
Plated or coated with lead, including terne-plate
7210 20 00
Electrolytically plated or coated with zinc
7210 30 00
Otherwise plated or coated with zinc
Corrugated
7210 41 00
Other
7210 49 00
Plated or coated with chromium oxides or with chromium and chromium oxides
7210 50 00
Plated or coated with aluminium
Plated or coated with aluminium-zinc alloys
7210 61 00
Other
7210 69 00
Painted, varnished or coated with plastics
Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7210 70 10
Other
7210 70 80
Other
Clad
7210 90 30
Tinned and printed
7210 90 40
Other
7210 90 80
72.11 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
Not further worked than hot-rolled
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211 13 00
Other, of a thickness of 4,75 mm or more
7211 14 00
Other
7211 19 00
Not further worked than cold-rolled (cold-reduced)
Containing by weight less than 0,25 % of carbon
Electrical
7211 23 20
Other
Of a thickness of 0,35 mm or more
7211 23 30
Of a thickness of less than 0,35 mm
7211 23 80
Other
7211 29 00
Other
Perforated
7211 90 20
Other
7211 90 80
72.12 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
Plated or coated with tin
Tinplate, not further worked than surface-treated
7212 10 10
Other
7212 10 90
Electrolytically plated or coated with zinc
7212 20 00
Otherwise plated or coated with zinc
7212 30 00
Painted, varnished or coated with plastics
Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7212 40 20
Other
7212 40 80
Otherwise plated or coated
Plated or coated with chromium oxides or with chromium and chromium oxides
7212 50 20
Plated or coated with chromium or nickel
7212 50 30
Plated or coated with copper
7212 50 40
Plated or coated with aluminium
Plated or coated with aluminium-zinc alloys
7212 50 61
Other
7212 50 69
Other
7212 50 90
Clad
7212 60 00
72.13 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213 10 00
Other, of free-cutting steel
7213 20 00
Other
Of circular cross-section measuring less than 14 mm in diameter
Of a type used for concrete reinforcement
7213 91 10
Of a type used for tyre cord
7213 91 20
Other
Containing by weight 0,06 % or less of carbon
7213 91 41
Containing by weight more than 0,06 % but less than 0,25 % of carbon
7213 91 49
Containing by weight 0,25 % or more but not more than 0,75 % of carbon
7213 91 70
Containing by weight more than 0,75 % of carbon
7213 91 90
Other
Containing by weight less than 0,25 % of carbon
7213 99 10
Containing by weight 0,25 % or more of carbon
7213 99 90
72.14 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Forged
7214 10 00
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214 20 00
Other, of free-cutting steel
7214 30 00
Other
Of rectangular (other than square) cross-section
Containing by weight less than 0,25 % of carbon
7214 91 10
Containing by weight 0,25 % or more of carbon
7214 91 90
Other
Containing by weight less than 0,25 % of carbon
Of a type used for concrete reinforcement
7214 99 10
Other, of circular cross-section measuring in diameter
80 mm or more
7214 99 31
Less than 80 mm
7214 99 39
Other
7214 99 50
Containing by weight 0,25 % or more of carbon
Of a circular cross-section measuring in diameter
80 mm or more
7214 99 71
Less than 80 mm
7214 99 79
Other
7214 99 95
72.15 Other bars and rods of iron or non-alloy steel
Of free-cutting steel, not further worked than cold-formed or cold-finished
7215 10 00
Other, not further worked than cold-formed or cold-finished
Containing by weight less than 0,25 % of carbon
Of rectangular (other than square) cross-section
7215 50 11
Other
7215 50 19
Containing by weight 0,25 % or more of carbon
7215 50 80
Other
7215 90 00
72.16 Angles, shapes and sections of iron or non-alloy steel
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216 10 00
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
L sections
7216 21 00
T sections
7216 22 00
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
U sections
Of a height of 80 mm or more but not exceeding 220 mm
7216 31 10
Of a height exceeding 220 mm
7216 31 90
I sections
Of a height of 80 mm or more but not exceeding 220 mm
With parallel flange faces
7216 32 11
Other
7216 32 19
Of a height exceeding 220 mm
With parallel flange faces
7216 32 91
Other
7216 32 99
H sections
Of a height of 80 mm or more but not exceeding 180 mm
7216 33 10
Of a height exceeding 180 mm
7216 33 90
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
L sections
7216 40 10
T sections
7216 40 90
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
7216 50 10
Other
Bulb flats
7216 50 91
Other
7216 50 99
Angles, shapes and sections, not further worked than cold-formed or cold-finished
Obtained from flat-rolled products
C, L, U, Z, omega or open-ended sections
7216 61 10
Other
7216 61 90
Other
7216 69 00
Other
Cold-formed or cold-finished from flat-rolled products
Profiled (ribbed) sheets
7216 91 10
Other
7216 91 80
Other
7216 99 00
72.17 Wire of iron or non-alloy steel
Not plated or coated, whether or not polished
Containing by weight less than 0,25 % of carbon
With a maximum cross-sectional dimension of less than 0,8 mm
7217 10 10
With a maximum cross-sectional dimension of 0,8 mm or more
Containing indentations, ribs, grooves or other deformations produced during the rolling process
7217 10 31
Other
7217 10 39
Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217 10 50
Containing by weight 0,6 % or more of carbon
7217 10 90
Plated or coated with zinc
Containing by weight less than 0,25 % of carbon
With a maximum cross-sectional dimension of less than 0,8 mm
7217 20 10
With a maximum cross-sectional dimension of 0,8 mm or more
7217 20 30
Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217 20 50
Containing by weight 0,6 % or more of carbon
7217 20 90
Plated or coated with other base metals
Containing by weight less than 0,25 % of carbon
Copper-coated
7217 30 41
Other
7217 30 49
Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217 30 50
Containing by weight 0,6 % or more of carbon
7217 30 90
Other
Containing by weight less than 0,25 % of carbon
7217 90 20
Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217 90 50
Containing by weight 0,6 % or more of carbon
7217 90 90

III. STAINLESS STEEL

72.18 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Ingots and other primary forms
7218 10 00
Other
Of rectangular (other than square) cross-section
Containing by weight 2,5 % or more of nickel
7218 91 10
Containing by weight less than 2,5 % of nickel
7218 91 80
Other
Of square cross-section
Rolled or obtained by continous casting
7218 99 11
Forged
7218 99 19
Other
Rolled or obtained by continuous casting
7218 99 20
Forged
7218 99 80
72.19 Flat-rolled products of stainless steel, of a width of 600 mm or more
Not further worked than hot-rolled, in coils
Of a thickness exceeding 10 mm
7219 11 00
Of a thickness of 4,75 mm or more but not exceeding 10 mm
Containing by weight 2,5 % or more of nickel
7219 12 10
Containing by weight less than 2,5 % of nickel
7219 12 90
Of a thickness of 3 mm or more but less than 4,75 mm
Containing by weight 2,5 % or more of nickel
7219 13 10
Containing by weight less than 2,5 % of nickel
7219 13 90
Of a thickness of less than 3 mm
Containing by weight 2,5 % or more of nickel
7219 14 10
Containing by weight less than 2,5 % of nickel
7219 14 90
Not further worked than hot-rolled, not in coils
Of a thickness exceeding 10 mm
Containing by weight 2,5 % or more of nickel
7219 21 10
Containing by weight less than 2,5 % of nickel
7219 21 90
Of a thickness of 4,75 mm or more but not exceeding 10 mm
Containing by weight 2,5 % or more of nickel
7219 22 10
Containing by weight less than 2,5 % of nickel
7219 22 90
Of a thickness of 3 mm or more but less than 4,75 mm
7219 23 00
Of a thickness of less than 3 mm
7219 24 00
Not further worked than cold-rolled (cold-reduced)
Of a thickness of 4,75 mm or more
7219 31 00
Of a thickness of 3 mm or more but less than 4,75 mm
Containing by weight 2,5 % or more of nickel
7219 32 10
Containing by weight less than 2,5 % of nickel
7219 32 90
Of a thickness exceeding 1 mm but less than 3 mm
Containing by weight 2,5 % or more of nickel
7219 33 10
Containing by weight less than 2,5 % of nickel
7219 33 90
Of a thickness of 0,5 mm or more but not exceeding 1 mm
Containing by weight 2,5 % or more of nickel
7219 34 10
Containing by weight less than 2,5 % of nickel
7219 34 90
Of a thickness of less than 0,5 mm
Containing by weight 2,5 % or more of nickel
7219 35 10
Containing by weight less than 2,5 % of nickel
7219 35 90
Other
Perforated
7219 90 20
Other
7219 90 80
72.20 Flat-rolled products of stainless steel, of a width of less than 600 mm
Not further worked than hot-rolled
Of a thickness of 4,75 mm or more
7220 11 00
Of a thickness of less than 4,75 mm
7220 12 00
Not further worked than cold-rolled (cold-reduced)
Of a thickness of 3 mm or more, containing by weight
2,5 % or more of nickel
7220 20 21
Less than 2,5 % of nickel
7220 20 29
Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight
2,5 % or more of nickel
7220 20 41
Less than 2,5 % of nickel
7220 20 49
Of a thickness not exceeding 0,35 mm, containing by weight
2,5 % or more of nickel
7220 20 81
Less than 2,5 % of nickel
7220 20 89
Other
Perforated
7220 90 20
Other
7220 90 80
72.21 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
Containing by weight 2,5 % or more of nickel
7221 00 10
Containing by weight less than 2,5 % of nickel
7221 00 90
72.22 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Of circular cross-section
Of a diameter of 80 mm or more, containing by weight
2,5 % or more of nickel
7222 11 11
Less than 2,5 % of nickel
7222 11 19
Of a diameter of less than 80 mm, containing by weight
2,5 % or more of nickel
7222 11 81
Less than 2,5 % of nickel
7222 11 89
Other
Containing by weight 2,5 % or more of nickel
7222 19 10
Containing by weight less than 2,5 % of nickel
7222 19 90
Bars and rods, not further worked than cold-formed or cold-finished
Of circular cross-section
Of a diameter of 80 mm or more, containing by weight
2,5 % or more of nickel
7222 20 11
Less than 2,5 % of nickel
7222 20 19
Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
2,5 % or more of nickel
7222 20 21
Less than 2,5 % of nickel
7222 20 29
Of a diameter of less than 25 mm, containing by weight
2,5 % or more of nickel
7222 20 31
Less than 2,5 % of nickel
7222 20 39
Other, containing by weight
2,5 % or more of nickel
7222 20 81
Less than 2,5 % of nickel
7222 20 89
Other bars and rods
Forged, containing by weight
2,5 % or more of nickel
7222 30 51
Less than 2,5 % of nickel
7222 30 91
Other
7222 30 97
Angles, shapes and sections
Not further worked than hot-rolled, hot-drawn or extruded
7222 40 10
Not further worked than cold-formed or cold-finished
7222 40 50
Other
7222 40 90
72.23 Wire of stainless steel
Containing by weight 2,5 % or more of nickel
Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
7223 00 11
Other
7223 00 19
Containing by weight less than 2,5 % of nickel
Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
7223 00 91
Other
7223 00 99

IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL

72.24 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
Ingots and other primary forms
Of tool steel
7224 10 10
Other
7224 10 90
Other
Of tool steel
7224 90 02
Other
Of rectangular (including square) cross-section
Hot-rolled or obtained by continuous casting
The width measuring less than twice the thickness
Of high-speed steel
7224 90 03
Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7224 90 05
Other
7224 90 07
Other
7224 90 14
Forged
7224 90 18
Other
Hot-rolled or obtained by continuous casting
Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7224 90 31
Other
7224 90 38
Forged
7224 90 90
72.25 Flat-rolled products of other alloy steel, of a width of 600 mm or more
Of silicon-electrical steel
Grain-oriented
7225 11 00
Other
Hot-rolled
7225 19 10
Cold-rolled
7225 19 90
Other, not further worked than hot-rolled, in coils
Of tool steel
7225 30 10
Of high-speed steel
7225 30 30
Other
7225 30 90
Other, not further worked than hot-rolled, not in coils
Of tool steel
7225 40 12
Of high-speed steel
7225 40 15
Other
Of a thickness exceeding 10 mm
7225 40 40
Of a thickness of 4,75 mm or more but not exceeding 10 mm
7225 40 60
Of a thickness of less than 4,75 mm
7225 40 90
Other, not further worked than cold-rolled (cold-reduced)
Of high-speed steel
7225 50 20
Other
7225 50 80
Other
Electrolytically plated or coated with zinc
7225 91 00
Otherwise plated or coated with zinc
7225 92 00
Other
7225 99 00
72.26 Flat-rolled products of other alloy steel, of a width of less than 600 mm
Of silicon-electrical steel
Grain-oriented
7226 11 00
Other
Not further worked than hot-rolled
7226 19 10
Other
7226 19 80
Of high-speed steel
7226 20 00
Other
Not further worked than hot-rolled
Of tool steel
7226 91 20
Other
Of a thickness of 4,75 mm or more
7226 91 91
Of a thickness of less than 4,75 mm
7226 91 99
Not further worked than cold-rolled (cold-reduced)
7226 92 00
Other
Electrolytically plated or coated with zinc
7226 99 10
Otherwise plated or coated with zinc
7226 99 30
Other
7226 99 70
72.27 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
Of high-speed steel
7227 10 00
Of silico-manganese steel
7227 20 00
Other
Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7227 90 10
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7227 90 50
Other
7227 90 95
72.28 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
Bars and rods, of high-speed steel
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228 10 20
Forged
7228 10 50
Other
7228 10 90
Bars and rods, of silico-manganese steel
Of rectangular (other than square) cross-section, hot-rolled on four faces
7228 20 10
Other
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228 20 91
Other
7228 20 99
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Of tool steel
7228 30 20
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
Of circular cross-section of a diameter of 80 mm or more
7228 30 41
Other
7228 30 49
Other
Of circular cross-section, of a diameter of
80 mm or more
7228 30 61
Less than 80 mm
7228 30 69
Of rectangular (other than square) cross-section, hot-rolled on four faces
7228 30 70
Other
7228 30 89
Other bars and rods, not further worked than forged
Of tool steel
7228 40 10
Other
7228 40 90
Other bars and rods, not further worked than cold-formed or cold-finished
Of tool steel
7228 50 20
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228 50 40
Other
Of circular cross-section, of a diameter of
80 mm or more
7228 50 61
Less than 80 mm
7228 50 69
Other
7228 50 80
Other bars and rods
Of tool steel
7228 60 20
Other
7228 60 80
Angles, shapes and sections
Not further worked than hot-rolled, hot-drawn or extruded
7228 70 10
Other
7228 70 90
Hollow drill bars and rods
7228 80 00
72.29 Wire of other alloy steel
Of silico-manganese steel
7229 20 00
Other
Of high-speed steel
7229 90 20
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7229 90 50
Other
7229 90 90